ArcelorMittal Europe – Flat Products

eUpdate client magazine | November 2026











1 / 5

Make sure your voice is heard.
Protecting Europe’s downstream steel value chain is vital.

by Bart Staelens, Head of operational pricing and marketing
ArcelorMittal Europe – Flat Products

Scroll down to read the article

The recent introduction of the European Union’s Carbon Border Adjustment Mechanism (CBAM) and Tariff Rate Quota system (TRQ) shows that Europe is willing to act in support of its steel industry. But Europe’s downstream value chain remains exposed: CBAM’s downstream reach is still too narrow, and the TRQ system does not extend to downstream products, risking significant trade distortion for Europe's high added-value manufacturers.





With measures for upstream steel significantly strengthened, the European Commission has been tasked with reviewing the impact of increasing steel product imports on the downstream sectors, and with considering the case for extending the TRQ's scope accordingly. The strength of the case will depend heavily on the evidence and input provided by manufacturers, the supply chain and other stakeholders.

Without active engagement, the case for extension is significantly weaker, and Europe risks further losing its manufacturing expertise, huge employment and strategic resilience.

The time for action is now.
Growing threat of downstream trade distortion

The new TRQ system should reduce steel imports by roughly 40% by the end of 2027 (a reduction of approx. 8Mt) in comparison with 2024 levels. This should improve capacity utilisation rates for EU steel producers to more viable levels, as market demand will be oriented more fairly in their favour.

However, when trade measures are introduced for one part of the value chain, there is a high risk that importers simply find alternative routes and products on which to focus. They are now faced with two options: continue shipping primary steel into a market that has become considerably less accommodating, or shift that same steel one step further down the value chain, where it can currently enter the EU largely unconstrained.

The EU trade balance in fabricated metal products has been in negative territory since 2020. Diversionary trade distortion significantly threatens European downstream manufacturers further, most notably in critical sectors including automotive and transport, machinery, fabrication, energy and appliances, which are all steel-intensive users.

EU27 exports and imports trend of fabricated metal products

Source: German Federal Statistics

The debate is not simply about trade defence. Preserving Europe’s manufacturing and supply chains is critical for its employment, know-how, decarbonisation, strategic autonomy, resilience and economic security. But at present, our manufacturing and supply chains are being weakened by cheap imports from overseas markets: a red line is being crossed.

The European Commission’s Industrial Accelerator Act (IAA), currently only at proposal stage, is - alongside CBAM and TRQ - seeking to address this through restoring manufacturing to 20% of Europe’s GDP by 2035, and pursuing a Made in Europe focus.

But Europe’s manufacturers must themselves wake up, see the threat facing their businesses and join the call for action.

The example of solar energy structures clearly demonstrates the risk, where a substantial steel manufacturing business, in the form of profiles and tubes, is being threatened by the import of ready-made or semi-finished products, particularly from Chinese manufacturers. Over a short period, Europe lost almost its entire solar panel manufacturing business. Now, the whole solar power manufacturing chain in Europe, including mounting systems and racks, is under threat. In 2026, 37% of the European market for solar energy mounting structures was already being supplied through imports, with price undercutting of up to 30% - equivalent to the price of European hot dipped coil. This is not sustainable, and solutions must be found. Once it’s gone, it’s gone.

Similarly, wind turbine imports (including towers and nacelles) have grown at a rate of more than 100% a year since 2022, with European fabricators experiencing substantially weaker order books due to outsourcing of tower manufacturing to overseas manufacturers, based on lower costs. The European Wind Tower Association (EWTA) is lobbying for stricter anti-dumping measures against overseas importers, as well as the extension of TRQs to both towers and turbines.

The same threats are being faced across the board in broader manufacturing and fabricating. There has been a steady decline in exports of fabricated metal products from Europe over the last 15 years or so, exacerbated by Covid, and a corresponding increase in imports, resulting in a net negative trade balance. A large part of manufacturing is structurally fragmented and made up of SMEs, making it hard to communicate the challenges with a single voice. But “divided we fall, united we stand,” and producers must come together to be heard. This is not just a fight for the steel companies: the winners should be the whole steel value chain in Europe.

Persistently choosing the cheapest import over the long-term viability of domestic production carries a real risk: Europe ends up "buying cheap" today and "making nothing" tomorrow — with lasting costs to skills, jobs, industrial capacity and economic resilience.

On the 7th September 2026, representatives of Europe's steel, metals distribution, processing and downstream manufacturing industries took a message to Brussels: “we must preserve the industrial value chains on which the European green transition, strategic autonomy, employment and resilience depend.”

EUROMETAL, which represents steel distributors, service centres, traders and other intermediaries across Europe, says the objectives of open markets, decarbonisation and fair trade “cannot be achieved if European producers and processors carry ETS, energy, labour and regulatory costs, while competing with imported steel-based products that do not face comparable conditions.”

Why this is urgent

The European Commission's review has effectively already begun, with formal consultation and data collection commencing in September. This process will run until June 2027, the legal deadline for the Commission's assessment. There is no obligation for the European Commission to take action, unless a robust case has been made.

Early engagement matters. Waiting for the problem to materialise is not a strategy. Sectors and producers that engage earlier will be better placed to ensure that their products and market dynamics are appropriately reflected from the outset in the discussion, its conclusions and any resulting regulatory changes.

What we can do

European politicians and regulators have been listening. Communication and dialogue worked on the initial definition of CBAM and TRQ. If everyone along the value chain speaks up, from steelmaking through distribution, processing and downstream manufacturing, Europe will listen and act again. It works, but only if we act now:

  • Write to the European Commission and your member state's trade ministry.
  • Talk and meet with other producers in your sector to build a joint, credible case.
  • Get in touch with us, trade lawyers, or other experts to help make that case effectively.


At ArcelorMittal, we are playing our part, engaging directly with Brussels and stakeholders, supporting our customers, and putting them in touch with knowledgeable experts.

What happens in Brussels matters. Decisions currently under discussion on extending TRQ’s product scope could significantly influence the competitiveness of Europe's industrial value chains.

“The more voices that speak up and explain the size of the threat, the greater the chance that regulatory action will be taken to protect your business, and our combined industrial and economic integrity across the whole value chain in Europe.

There is only a short window of opportunity. Let’s make our voices heard, together. ”

by Bart Staelens,
Head of operational pricing and marketing ArcelorMittal Europe – Flat Products

















Show me all articles