ArcelorMittal Europe – Flat Products

eUpdate client magazine | November 2026


2 / 5

Amstrong® Ultra and USP Steels – a perfect match

USP Steels and ArcelorMittal partner on Amstrong® Ultra high-strength steel solutions.

Scroll down to read the article

Customers across a range of key sectors are increasingly demanding higher strength and lower weight steel specifications, driven by performance, cost and sustainability. USP Steels and ArcelorMittal have recently been building their partnership to address these demands in the UK with the Amstrong® Ultra 700MC offering - an ultra-high strength, cold-formable structural steel, with impressive formability and weldability performance.





USP Steels is one of the UK’s leading hot rolled steel sheet and plate suppliers and service centres, based in Dudley, West Midlands.

Simulation of USP Steels new 109,000 square foot state-of-the-art distribution facilities at Dudley, West Midlands.

“We asked ArcelorMittal if they could develop Amstrong® Ultra 700MC in a 2,000mm width and 5.00mm gauge hot rolled coil to satisfy one of our leading customers,” explained Ryan Baraks, Managing Director of USP Steels. “And they have absolutely delivered. It's very rewarding to build up such close collaboration with them on a product with so much potential.”

Ryan Baraks, Managing Director, USP Steels Ltd.

Decoiled steel plate at USP Steels Dudley service centre.

Amstrong® and Amstrong® Ultra are thermo-mechanically rolled, fine-grained, low-alloy structural steels, with ultra-high strength up to 700 MPa. They are available in an exceptional dimensional range with widths up to 2m - allowing for significant weight reduction or down gauging compared to conventional structural steels. They offer up to 40% weight savings compared to conventional structural steel. Their inherent strength and durability enable manufacturers to extend component lifespan and reduce maintenance frequency, ideal for components in the construction, earthmoving, mining, transport and agricultural machinery sectors.



The full Amstrong® range is available in ArcelorMittal’s XCarb® low carbon-emissions steel with the recent addition of Amstrong® Ultra 700MC in its test phase, lowering its carbon footprint further.



Click on the visual to read our XCarb® brochure.

“Amstrong® Ultra is the go-to solution when high strength needs to be combined with precision and long-term durability,” commented Andrea Righetti, Account Manager at ArcelorMittal Commercial UK Ltd. “Partnering with Ryan and his colleagues at USP Steels in developing a further advance in the Amstrong® range has been a win-win for both companies. It’s a great example of the technical expertise we have at our mills, and how we can co-develop innovative solutions for our customers.

Andrea Righetti,
Account Manager at ArcelorMittal Commercial UK Ltd.

To read the full article, click here


















Show me all articles